Geekvape-Athena Squonk Kit (Mechanical)
Shown With a Tenacious Mods Drip Tip!
From GeekVape comes their very first squonk kit, The Athena Squonk Kit. The Athena squonk kit is a fully mechanical* squonk mod paired with the Athena Bottom Feeding RDA. Constructed of Stainless Steel and Aluminum, the Athena Squonk Mod is compact, lightweight, and powerful. It features dual magnetic battery panels, which eliminate the need for a battery ribbon. You can pop off both sides, and the one opposite to the internals has a nice slot for your finger to easily push out your battery... very clean and thoughtful... This also opens up the possibility for swapping out faceplates for a custom look between colors. Also, I see potential for future panel to come out, though that's my speculation...
The Kit also includes a soft silicone squonk bottle with 6.5ml liquid capacity. As an additional safety feature, the faceplate of the Athena Squonk Mod features a locking switch to ensure no accidental misfires.
The Athena RDA is a gold plated postless build deck with fully adjustable dual angled top airflow to allow for both single and dual coil builds. It is similar in airflow and deck to the Dead Rabbit. At 24mm it has a great amount of space for your builds. The Athena RDA features two groove cutouts along the walls of the deck which function as a locking mechanism for the top cap. Designed for squonking devices, the Athena RDA has a deep juice well and a bottom feeding squonking pin centrally located below the build deck to ensure balanced wicking.
This mod will fit 25mm flush, and looks great with them.
*This device is strictly for ADVANCED USERS and it is NOT recommended for beginners or those who do not fully understand your battery's Amp Limits in correlation with your Atomizer's Resistance. Use new/genuine high drain batteries with this device. Please be aware that there is no low-voltage protection in this unregulated box, so be aware of what voltage your batteries are firing at. There is also no over-current protection, so keep in mind the amp limitations of your batteries as well. Use with extreme caution and always check your resistance with a meter (check often)! By purchasing the product, you agree that you are knowledgeable on how to properly use this product and that we are NOT responsible for any misuse or accidental malfunctions of this product.
Athena Squonk Mod:
Dimensions: 73mm by 46mm by 25mm
Powered By Single High Amp 18650 Battery (Sold Separately)
Bottom Feeding (Squonk) Design
6.5ml Silicone Squonk Bottle
Stainless Steel & Aluminum Construction
Auto-Adjusting 510 Pin
Safety Lock Switch
Dual Magnetic Battery Panels
Postless Build Deck
Designed For Single & Dual Coil Configurations
Quad 2.6mm Terminals With Side Tension Via Flat Head Screws
Deep Juice Well
Top Cap Locking Mechanism
Gold Plated Deck
Dual Adjustable Angled Top Airflow
7.8mm by 1.8mm Slots
510 Delrin Drip Tip
9mm Tapered Inner Bore
810 Ultem Wide Bore Drip Tip
14mm Tapered Inner Bore
Gold Plated Squonking Pin
Gold Plated 510 Pin
1x Athena Squonk Mod
1x Athena RDA
1x 6.5ml Silicone Bottle
1x 6.5ml PE Bottle
1x 810 Ultem Wide Bore Drip Tip
1x 510 Delrin Drip Tip
1x 510 Delrin Drip Tip Adaptor
1x Bag Of Spare Parts
1x User Manual
My Take: I have spent a good bit now with this device, and I am left with nothing but stellar impressions. The RDA has me tempted to try with the regular pin on other mods it's so good. No leaking, and the juice well is so perfect with how to tuck your wicks. They get fed precisely with the BF Pin and the top airflow assures no leaking. Further, it is angle down and inwards towards your coils. With the Dead Rabbit Style deck, this still gives you room for big builds... surprisingly so. I thought mine was going to hit the cap, and it's not close.
I will get to more, but overall. I don't think this kit can be beaten for the money. I also think that it's a more than fine setup for on the go. If you have squonkers, they tend to be nice and carry a price tag that's rather heavy. Then, you may get a bottle, but RDA, extra bottle, all of that stuff is something to budget for on top of the mod. You can easily get into $300 territory when all is said and done with a lot of squonk setups.
I say, this one works like a dream. If you wanna get your feet wet, here's your perfect opportunity to squonk all over em'. If you squonk, this is a bargain price to get a mod that you won't stress out carrying, and an RDA you may find sitting on top of your custom Squonk Box. The Athena is perfect for so many demographics. It's a wonderful kit, enough said.
We Also Recommend
Deathwish Modz-The Ripper - VERY Limited Stock!
Vaperz Cloud-VCM and Glacier Reborn Set
Deathwish Modz-Barebones with Unholy V2
Vaperz Cloud-NATO Mod collaboration With Asylum Mods